-
From Ikegami.com:
The Ikegami's HTM-series high-end color monitors offer a choice of 15-inch monitor to meet not only every HDTV format, but also SDTV standards. Designed for diverse broadcasting formats and system requirements, the color monitors offer compatibility with HDTV/SDTV analog component signals (Y, Pb, Pr/RGB) as standard. Serial digital input compatibility is optionally available. The monitor is in compliance with the RoHS rules.
Features
750TV lines resolution at HDTV. 1080i and 720p compatible. Compatibility with HDTV/SDTV analog component signals(Y,Pb, Pr/RGB) as standard. Rear access design for optional plug-in modules. Up to four modules can be plugged into the monitor. DKM-511A and 511B, multi SDI format (HD-SDI/4:2:2) modules are available. (Option) Embedded audio (2 ch analog, or 8ch AES/EBU) outputs are available. (Option)
DAM-504 (4ch)/DAM-508 (8ch), audio level indicators are available. (Option) Remote control (in parallel or serial connection) is available. (The SRC-301Z serial remote controller allows control up to 99 monitors)
ASP-100, auto set-up probe is available. (Option) 10-bit processing of a full range of digital data. Employs a rotary encoder system for changing data as well as for changing display size, display position, side pin correction and other elements. A BFS circuit is used to stabilize white balance. Integrates the full spectrum of test signals including cross hatching, flat field(50%), window(100%), character and staircase with plug.
A 4:3 marker can be displayed on a 16:9 display. A range of markers can also be displayed on 16:9 or 4:3 aspect screen in NTSC. A built-in function to shadow any images other than 4:3 (shadow transparency level: 0% or 40%) at 16:9 display (HDTV) enables immediate visualization of a 4:3 image while observing a 16:9 monitor.
-
From Ikegami.com:
A new flat surface and high resolution CRT is employed to achieve superb picture. Optional new multi SDI modules have been developed for the multi-format monitor. These modules auto-detect HD-SDI or SD-SDI inputs. Also, the monitor can optionally output embedded audio (in analog or AES/EBU digital) and incorporate audio level indicators (for 4ch or 8ch).
Features
- 950 TV lines resolution and top-end broadcast quality.
- 1080i, 720p, 1080/24pSF, NTSC and PAL are available (Including Option)
- HDTV /SDTV analog component inputs are standard.
- Rear access plug-in modules for SDI (multi-format) and NTSC or PAL input signals available as options. Up to four modules can be plugged into the monitor.
- Plug-in module design allows for future system extension and easy maintenance.
- Auto-set up probe can adjust for desired color temperature. (Option)
-
From Ikegami.com:
The TM9-3 Series monitor offers NTSC / PAL multi-format compatibility, selectable 4:3 / 16:9 aspect ratio, preset-table controls, two video and audio inputs, and operates from virtually any AC source from around the world. It is a rugged top performer that you can take anywhere with confidence.The TM9-3D model has a built-in Serial Digital Component input.
(Optional Rack Mount Adapter)
RK930SU (6U type)
RKM0B930 (5U type) -
From Ikegami.com:
70 Series are High performance, Low cost color SDTV Monitors, providing NTSC-PAL automatic selection. Then Units are specifically designed for production or broadcast applications, and provide high-fidelity video reproduction with wasy operation. utilizing in Line Gun CRT technology, BFS circuits, and Comb filter.
Features
Cathode Ray TubeIn-line gun, dot-shadow mask, high resolution CRT, assuring convergence stability. Black Matrix surrounding CRT face assures high contrast under bright ambient lighting.
CircuitryNTSC / PAL format auto detect. Screen aspect ratio of 4:3 or 16:9 switchable on the front panel. BFS (Beam Feed-Back System) provides long-term black level stability. Pre-set Controls: Hue (NTSC Only), Chroma, Y/PB/PR Chroma, Brightness, Contrast Comb Filter provides wide band luminance, switchable to notch filter at the front panel (NTSC only). Sweep failure protection circuit prevents phosphor burns.
System Conveniences4 video inputs (Ach composite /Bch composite / YC / RGB or Y, Pb, Pr) selection on the front panel. Digital inputs (ITU-R601 format) is optionally available. Rack mounting hardware is also available.
Test FacilitiesUnder scan switch to permit observation of picture corners. Pulse cross switch for sync signal verification.
SpecificationsGENERAL Input Voltage 100V-120VAC ± 10%, 50/60Hz 200V-240VAC ± 10%, 50/60HzPower Consumption Approx. 85W Ambient Temperature 0-40°C (32- 104°F), 90% or less relative humidity Dimensions (WHD) 450(W) X 310(H) X 515(D) mm Weight Approx.24kg RATING Input Signal Video: 2 inputs (Ch-A and Ch-B) Input Level Video (composite positive polarity):
Composite : 1.0 Vp-p Non composite : 0.7 Vp-p Y/C signal: Positive polarity
Y : 1.0Vp-p C : 0.286Vp-p (burst level) RGB Signal: Positive polarity G : 1.0Vp-p (Sync on G) or 0.7Vp-p
R, B : 0.7Vp-p YPbPr signal (N10/SMPTE Format): Positive polarity
Y : 1.0Vp-p
Y white : 0.7Vp-p, Sync : 0.3Vp-p
Pb,Pr : 0.525Vp-p (100/0/75/0 Color Bar) Sync Signal : 4Vp-p ± 2Vp-p, Negative polarityInput Impedance High Impedance Bridge Connection, or 75 ohm termination
(75 ohm termination plug is an option)Connection Video/RGB or Y, Pb, Pr: Remote Controls Parallel Remote D-sub 15pin:
4:3/16:9, TALLY ON/OFF, Y/C ON/OFF, AUXON/OFF, CH A/B, COLOR/MONO, DIGITAL ON/OFFPERFORMANCE CRT TM15-70R: Mask Pitch 0.27mm Resolution (at center) 650TV lines or more Return Loss More than 40dB (100kHz X-Ray Less than 0.1mR/H (Anywhere 50mm or remoter from the monitor) VIDEO SIGNAL SYSTEM Frequency Response Measured with Aperture Gain 0, (notch filter OFF) Pulse Response At each RGB amplifier output with 0.05 micro-sec. Chrominance Rejection Ratio Less than -24dB (with aperture correction 0) Aperture Correction Waveform of Overshoot of 2T pulse appear symmetrically with notch filter ON Noise Coherent noise : -40dB
Hum noise : -50dB Other noise : -50dBCOLOR SIGNAL SYSTEM Chroma Signal Response NTSC: 3.58MHz ± 0.5MHz +1/-3dB Demodulation Axis Phase Error R-Y vs. B-Y : 90° ± 2° SYNC SYSTEM Sync Stability Stability of synchronization will be met for the following conditions
b) External Sync: Sync Signal Input leveI of 0.3-6.0Vp-pAFC Time Constants SLOW. Approx. 2.0msec. DEFLECTION SYSTEM Scanning Frequency Horizontal : 15.734kHz (NTSC); 15.625kHz (PAL) Scanning Amplitude NORMAL SCAN (adjustable)Over scan is 1% of CRT effective area with an aspect ratio of 4.3 UNDER SCAN (adjustable)Four corners are visible within boundary of effective area Geometry and Linearity Less than 2% of picture height Convergence Error Center : less than 0.3mm (within circle of 80% of picture height)
Corners : less than 0.4mm (outside area of picture center)HIGH VOLTAGE Tolerance 25kV ± 1kV Regulation Within ± 2% over the range of 0-350 micro A referred to 100 micro A APPLICABLE STANDARD Standard Safety
Radio noiseComplied with UL1950/DHHS
Complied with FCC Class A
Complied with RoHS directiveOPTION DK-175: ITU-R601 SDI Input Kit
